Patch

Version 2.0.1

Industrial Aftermath

Fixed issue where Martial plots wouldn’t upgrade unless your defense meter was full.
Fixed issue where stim-packing dogmeat would play the wrong animation.
Fixed Robco boxes in various places around the Commonwealth - they should now once again have the box art and provide 25 sensors.
The Industrial requirement to allow Martial plots to upgrade can now be turned off in the holotape, both globally and locally.
Martial and Recreational plots now have a base level defense and happiness, respectively, if Dynamic Needs is turned off.
Added Martial and Recreational options to the notification settings in the holotape.
Added local detonation option to Tools section of holotape.
Added local zoning laws option to reset the local laws to use the global options again.
Ham Radio is no longer sunk into the table of the level 2 guard post.
Fixed bug where changing the ASAM Sensors to invisible would cause almost everything to have the word Activate when hovered over.
Added option to turn off the Stockpile system for player’s who have a mod conflict or save corruption preventing resources from being generated. Turning this OFF, will cause resource generation to cut in half and is not recommended unless you are experiencing issues with the resource generation in the first place.
ASAM Sensors are no longer free from vendors.
Fixed several errors in New Bugle articles. Those responsible have been sacked.
Increased stagnation of OnCellLoad updates to reduce likelihood of sudden crashes when entering a settlement with a ton of plots.
Fixed misaligned beam on tier 3 Checkpoint building model.
All default Sim Settlements commercial buildings now have full support for Performance Settings. Including separating out the furniture from the clutter so that the buildings aren’t completely empty if clutter is turned off.
Fixed issue where ASAM Sensors would be continually added to vendor tables each time the game was loaded. Unfortunately, the “damage” has already been done - so any vendors that had large amounts of ASAM Sensors will continue to have them in that save. The solution for existing saves would mess with any other mods that had injected items.
All vanilla objects have been removed from Sim Settlement’s default and Industrial Revolution building plans. Any save file that is created from this patch on, will no longer need to run the Self Destruct Sequence before uninstalling. Saves with previous builds of Sim Settlements may have already spawned some of those vanilla objects and running Self Destruct before uninstall is still recommended for those.
Fixed several of the new perk magazines which had mismatched cover and inventory art.
Fixed issue where power would display as if not required on a plot before it was built to level 1, this would prevent power from passing through the plot. If you have a plot with this issue, you’ll need to refresh it for the update to function.

Version 2.0.0

This is NOT the Industrial Revolution

Fixed issue where the HUD wouldn’t show up after you first loaded your game in a settlement.
ASAM Sensors will now appear on plot posts. When activated, these bring up a menu of options. Visible ASAM Sensors can be turned off via a holotape option, which will cause the activation menu to replace the Find Owner function on the plot (though Find Owner is available on the activation menu).
Building plan can now be selected. On the ASAM Sensor menu, select Choose Building Plan. A container will be shown, whichever building plan is looted last will be built. If the building plan has a custom message object configured, it will be shown when you first select it so you can learn more about the building before committing to it.
Added City Planner’s Desk - acts as a workbench for crafting Sim Settlement’s objects and also includes a terminal with a copy of the City Manager 2078 software on it.
Added 3 variations of the holotape that are craftable at the City Planner’s desk. The City Planner’s Desk is only unlocked after the holotape has been found and loaded - these craftable versions are renamed for sorting purposes.
Added Manual Upgrade and Manual Advanced Upgrade options. These switch buildings so that they will no longer auto-upgrade and instead require you to approve each upgrade on the plot options menu.
Added new ASAM Vision mode to find buildings that need a manual upgrade. They will be highlighted in a pulsing green.
Changed the bed in the tier 3 Clinic so it doesn’t count toward the bed total of the settlement.
Fixed an issue where add-on industrial plots would never provide more than 2 scavenge bonus.
If Plot Costs are turned off ASAM Sensors cost just a single steel.
Fixed an issue where you would need to change cells before the audio settings were refreshed after you loaded your game.
Items in a plot spawned container will now be automatically moved to the workbench if the plot is refreshed or destroyed.
Confirmation message about demolishing the building when changing the building plan will now only show up if the building is higher than level 1.
Changed data on building plaques: Combined Income and Tax into a single field; Happiness Bonus renamed to Happiness; Removed Scavenging Bonus field; Added Level field to show what level the current building is at.
Added queue system to add-on pack registration to avoid conflicts.
If an add-on pack is removed, there is now a 20 second delay before those plots will begin reconstruction. This is to avoid a scenario where the add-on pack hasn’t finished loading before the check is complete.
Refresh Local Plots and the Immersion Breaker Breaker will now attempt to remove leftover objects.
Added Machine Ambience to audio options. This will control things like generator hums.
Changed the name Hawkers to Barkers. (thanks ErusPrime! :) )
Armor Store L3 Barker will actually work with the Mute option now (though there is still an issue with it regarding the 50% volume setting - being looked into).
Doors that were open before you exited the game should now correctly auto-close when you load back in (assuming you have auto-close doors enabled).
Added 3 new plot types, Martial (defense - available in 1x1 and 2x2 versions), Recreational (happiness), and Advanced Industrial. None of these have building plans in the base Sim Settlements mod. They must be added with the Industrial Revolution expansion pack or from Add-on packs.
ASAM Sensors are now leveled list injected into various vendors around the Commonwealth (may take 30 in game days for them to show up due to respawn rules).
Created a new item representing the constructible 10-pack of sensors to make it less confusing in the build screen.

Version 1.1.9

Last of the 1.Xs

Removed collision from construction scaffolding. This will make running wires no longer a race against construction starting.
Defense requirement formula reduced to Food + (Water/2). Was previously Food + Water, which was based on the vanilla requirement to reduce raids to a minimum. This new formula will allow for a reasonable raid chance while still getting Sim Settlements upgrades. Players who don’t want to be raided much can continue to build excess defense to gain that effect.
Updated plot material costs. Many of them were lacking the foundation material costs. Others needed to be updated to reflect the increase in size to 2x2. They are balanced around being a slightly lower cost than if you had manually built the foundation for them.
Reorganized SMM menu so Residential plots are first in the menu since they’re needed the most.
Companions will no longer be re-assigned to their plots if you take them back as a companion. This should prevent an issue where companions assigned as shopkeepers would no longer have their affinity dialogue.
Fixed a bug where the building materials could randomly reappear on a plot.
Changed the way streetlights work for Commercial: they will now turn off if a plot is unoccupied and they will now automatically work with all add-on buildings without the author needing to spawn them.
Fixed issue where a weapons shop was reducing defense instead of increasing it.
Changed the way initialization is done to potentially solve the issue where the holotape would seem to be stuck at the “install” screen.
Foundation plots can now be sunk a bit further into the ground.
Turrets can now be used with the Plot Powered system, so add-on authors can require that a plot be powered in order for the turret to remain active.
Added second recipe for ASAM Sensors which crafts 10 at a time.
Added Audio Options section to Holotape. This breaks the sounds added by Sim Settlements into groups so the volume can be cut in half or muted for each category.
Added Performance Options section to Holotape. Changing these will cause Sim Settlements to remove or replace certain types of objects to help players struggling with performance issues (such as unplayable frame rates, or crashes). Not all buildings are configured to take advantage of these yet. More buildings will be updated with each patch to take full advantage of this new system.
Audio options will now be correctly used each time you enter a settlement. Previously, had you turned off sounds in the holotape, the game would turn their volume back up as soon as you loaded your game again or loaded back into a settlement.
Added None option to Commercial Requirement which allows commercial to no longer check for home or population counts.

Version 1.1.8

Maximum Integration

Fixed several beds that were causing the NPCs to lay at weird angles.
Altered CrashWatch message to remind players they could turn it off in the holotape.
IBB and Refresh Local Plots will now correctly work immediately with updates made to Sim Settlements or AddOn Packs on level 3 buildings, previously you would have had to do so twice for changes to appear.
Positive power, water, defense, and food bonuses should now show up in Workshop mode when highlighting plots. This has the added advantage of maintaining the current counts during building stages, which should be especially helpful to players using Realistic Build Times. Negative modifiers still require viewing the plaque.

AddOn authors will be able to convert their building plans to make use of the new feature to apply their bonuses directly to the plot.

Clicking Town Meeting Gavel on the Aid tab of your inventory should no longer cause you to get stuck in a fade to black screen until you hit your pipboy button.
Cleaned maintenance script to reduce likelihood of log spam.
Added a custom Sim Settlements build menu. It requires Settlement Menu Manager (http://www.nexusmods.com/fallout4/mods/24204/ or https://bethesda.net/en/mods/fallout4/mod-detail/4018878) which prevents custom build menus that integrate with it from ever screwing up the workshop menus.
Moving a plot will no longer require refreshing to make it resume construction.

Version 1.1.8a

Makes a small change so that defense values can be correctly applied to plots in workshop view.

Version 1.1.7

Boats and Snaps

Adjusted building stage transition time slightly to try and smooth it out better.
Added floor snaps to the foundationless plots so they will snap on top of floor pieces.
Fixed collision on foundationless plots to make them more likely to snap to each other correctly.
Removed collision on plot arrow.
Fixed issue where hitting “Take” on a building plaque could result it in being positioned floating in the world near the plot.
Fixed the hospital style bed so that it correctly counts as a bed in the workshop. The Immersion Breaker Breaker or the Refresh Local Plots option will fix any of these you have in your settlements.
Added a new house model that was contributed by user karmakimmy7.
Fixed a case where an NPC could get re-assigned to an empty house even when they already owned one.

Version 1.1.6

Designer's Delight

Fixed another case where settlers could be flagged as having a job when they didn’t.
Fixed a bug where the happiness meter would stay at zero, even if the happiness was fine in workshop mode.
Dogs/Brahmin should no longer appear jobless in ASAM Vision.
Automatron robots will no longer take over residential plots.
Robots will no longer show up as homeless in ASAM Vision.
Settlers can now be assigned to vanilla work objects along with Residential plots in either order. If residential plots are assigned before vanilla objects, there will still be a brief 10 second period where the NPC is unassigned from their residential plot.
Added Architect’s TSquare. This is a new tool that can crafted in the Chemistry Station under Utility. This changes the plot activation options to allow you to cycle through the building plans for that plot type, it will display the name of the building plan in the corner. Doing so will reset the plot to level 1. It is the preferred method of altering the building plan, as opposed to the previous method of picking up the plot in workshop mode and choosing the middle option.

Version 1.1.5

Operation Debug

Fixed several random objects that were being moved by Sim Settlements (thanks Creation Kit -.- ).
Fixed messages at the bottom of the holotape that print out when Auto Close Doors was toggled so the messages now match what is actually happening.
Spotlights, dogs, and your current companion will no longer be detected as homeless/jobless by ASAM Vision.
ASAM Vision will now be turned off if you toggle it while outside of a settlement. You will still get the warning message, but can be confident it turned off.
Tax day for zero dollars will no longer trigger before the holotape is found.
If an Addon Pack is removed, plots using the Addon will be reset and assigned a new building plan the first time you visit each settlement.
Staggered object update code when the player arrives in/leaves a settlement. This should reduce the likelihood of CTDs on Xbox and older PCs when fast traveling to/from a settlement that has a large number of plots.
All Industrial jobs will now have the scavenger icon, this also means they get the bizarre default behavior of spending a lot of their time wandering around your settlement with gun drawn. Existing buildings will need be refreshed with the Immersion Breaker Breaker or the NPC re-assigned to correct the icon.
Switched all beds used by the default Sim Settlements houses so they each count as exactly one bed. Any plots with an incorrect bed count will need to be refreshed (with the IBB or new holotape tool mentioned below).
Added maintenance quest that will help to alleviate issues caused by various script lag.
Replaced hammer construction markers with wrench and torch animations. The loud sounds of the hammering defeated the purpose of keeping building sounds to a very short radius.
Added new holotape Tool to “Refresh Local Plots” - which will apply the Immersion Breaker Breaker effect to all the plots in the current settlement.
Mod version upgrade message should now work on Xbox.
Altered the way assignment is tracked, this should reduce the likelihood of NPCs stealing each other’s plots.

Version 1.1.5a

Find Owner tracking quest will now be cleared if an NPC moves to another settlement, is killed, or is assigned to a new plot.
Fixed issue with ASAM Vision where a settler could still be flagged as being employed even though they didn’t have a job yet.
Settlers can once again be assigned to a vanilla/mod added job after being assigned to a residential plot.

Version 1.1.4

View Plaque Issue

Fixed a bug that could be caused by a plot being deleted by a third party script (from outside Sim Settlements) without firing the appropriate events.
Added maintenance script that will periodically scrub the auto-assignment queue of bad data to prevent that bug from occurring again in the future.
All beds should correctly count as one bed now.

Version 1.1.3

Shut the Bleeping Door

Fixed issue where a Town Meeting could get stuck a fade to black for a very long time for some users.
Fixed issue where ASAM Vision could quit working if you used it outside of a settlement.
Improved plot initialization code (thanks cdante!), this should reduce occurrences of plots getting stuck due to backed up workshop scripts.
Settlers will no longer be re-assigned back to plots after being moved to a new settlement.
ASAM Sensor and ASAM Vision Switch recipes are automatically unlocked when the holotape is loaded. This was done because the global that controls this is being reset for some users for an unknown reason.
Agricultural Plots should no longer bug out and require power. Any that currently require power can be fixed with the Immersion Breaker Breaker.
Agricultural Plots should no longer lose their food count when viewed in Workshop mode. For plots that already have this issue, the Immersion Breaker Breaker will now correct it.
Added Notification Settings option to convert messages to pop-ups.
Plot doors will now close themselves. This only applies to doors created after this patch. Using the Immersion Breaker Breaker on a plot will register its doors with the autoclose system.
Added Auto Door Closing controls to holotape.

Version 1.1.2

Tools of the Trade

“Can't spawn object” messages moved to the trace log instead of printing to the screen.
Added Town Meeting ability which brings all settlers directly to you after a short fade out. The settlers then follow you for about 30 seconds. The Town Meeting can be started in the holotape or with an object called the Town Meeting Gavel which can be crafted at the Chemistry Workbench.
Added ASAM Vision ability which highlights settlers that need homes or jobs. You can cycle through the versions of this in the holotape or with an object called the ASAM Vision Switch which can be crafted at the Chemistry Workbench.
Settlers assigned to only a residential plot will no longer be flagged as having a job. This should make Sim Settlements work better with Settlement Management Software (unconfirmed). Note that settlers assigned to residential plots prior to this patch are flagged as having a job still * only new assignments will correct this issue.
Modified the way building models are handled to help prevent future “double-buildings” from occurring (where a new building model seems to start growing on a plot that already has one).
Added Tools menu to the holotape. Citizen Needs and Start Self Destruct Sequence can now be found there. As well as a toggle for ASAM Vision, and an option to Call Town Meeting.
Updated Help menu in the holotape. The names should now match what are actually in the holotape.
Added Citizen Needs Requirement toggle to holotape. This will allow upgrades to happen even if settler needs aren’t met. This will allow different gameplay styles such as using some settlements as farm hubs to supply food for the others, or playing with low defense to encourage raids. Better options for those play styles will be coming in future updates, but this is an immediate means of enabling that playstyle without having to sacrifice Sim Settlement upgrades. Note: Taxes still require that all needs are met regardless of this setting.
The Immersion Breaker Breaker should now be much better at cleaning up leftover objects if you experience random bugs with spawn objects or if you uninstall an AddOn pack which had generated one of your buildings.

Version 1.1.1

Let Them Hear Sound

Fixed light alignment of level 2 Trailer Trash building plan so it works with 2x2 plots.
Immersion Breaker Breaker will now correctly work with 2x2 plots.
Removed hose from L3 farm plot as it doesn’t work with all plot sizes, may add it back in the future when I find a way to deal with the post being in a different place on each plot size.
Concrete plots now have a proper sound effect when placing them.
Fixed front left corner collision so that floor tiles can be snapped there.
Changed farm collision so that the very front of the plot is open for settlers to be able to walk on. This should also help with snapping.
Special effects for demolition can be turned off in the holotape, will make it easier for re-placing plots as you won’t have to wait for the debris to de-spawn.
NPCs will now be fully cleared from animation marks of a plot after they are re-assigned. Previously, someone else would need to be assigned to the plot in order to change ownership of the markers. So you could end up with a shopkeeper that would come use the farming animation markers even after they were unassigned from an agricultural plot.
Random reassignment should no longer occur from the mod. Third party mods can still override assignments - but Sim Settlements will no longer compete with itself.
Settlers will no longer be able to own vanilla work and Sim Settlements jobs (they can still own a home plus vanilla work). To fix existing multiple assignment issues, store the vanilla object in the workshop and place it again.
Fixed navigation in level 1 Clothing Store so that the settler will actually man the shop. Will require using the Immersion Breaker Breaker to update existing.
Fixed issue where some settlers would stop qualifying for auto-assignment.
Fixed the Sim Settlement sound effects - turns out you guys couldn’t hear what I heard!

Version 1.1.0

Prepare for the Future

Made changes to the plot counting code to prep for additional plot types.
Re-designed data storage to expand possibilities for future updates. This will also improve the code that controls taxes and commercial property requirements. This requires a short install period when you first load your game to migrate to the new storage. It is a non-destructive process so you can still roll back your save or mod version without issue.
Replaced all vanilla furniture markers that are spawned by Plots with Sim Settlements versions, this should resolve the issue with many farmers and industrial scavengers seeming to just stand around. (Use the Immersion Breaker Breaker on existing plots).
Sim Settlements crops should now all be manually harvestable every so often.
Plots were increased in size by about 10% so they match with the game’s existing objects. Your previously placed plots are still the former size.
New 2x2 plots with foundations have many more snap points and the arrow indicator is more easily visible.
Added Other category to Commercial for AddOn packs to make use of for custom shops.
The Holotape (and some sensors) can now be found in two additional locations around the Commonwealth.
Added toggle for Crash Watch in the Notifications section of the holotape.

Version 1.0.6

Hey, Get Back to Work!

Fixed issue where plots created before patch 1.0.4 could get stuck after you demo the building. The building will start constructing again after about 15 seconds unless you’ve modified the building material delay holotape option.
Prepped building plans to support new industrial buildings.
Added support for expansion esps.
Moved residential power connect point to a new spot to make it much less likely it gets covered by a building model.
Robots are no longer counted in upgrade calculations. This means they no longer are added to the food and water requirement but also don’t count towards the Commercial population requirement.
Changed plot furniture marker code to help encourage AI to stay at their posts during work hours. Requires a Force Update with the Immersion Breaker Breaker on all plots you want to fix this issue for.
Added option to show HUD meters only in workshop mode. This can be tricky as there is a queued delay in HUDFramework which can cause this to fail sometimes.
Added scaling options to HUD meters of 100% (default), 75% of default, and 50% of default.
Added basic positioning options to HUD meters: Left, Indented Left, Right, Indented Right, Top, Middle, Bottom.
Leftover crops will now be scappable when the Sim Settlements Helper mod is installed.
Added buffer system to CrashWatch code to further reduce false positives caused by Sleeping/Waiting/Fast Travel.
Added Citizen Needs option to holotape which will show the needs of the current settlement in percent when selected. Meant for players who don’t have HUDFramework or can’t get it working.

Version 1.0.5

Big Bada Boom

Fixed issue with Auto Assign Unique NPCs option preventing manual assignment as well.
Added holotape option to destroy all plots in the game to make uninstall simpler. Takes about 3 minutes to run, you will receive a pop-up on completion.

Version 1.0.4

Holotape 2.0

Added a delay before building materials appear so users can snap plots in place without fighting the collision of those.
Redesigned holotape options, dropped lore friendliness in favor of clear names.
Holotape options now refresh screen instead of displaying lore friendly explanation, this will make the holotape feel a little more responsive.
Building Material Delay can now be configured in the holotape.
Commercial requirement can now be set to homes or population instead of both as it was in the initial release.
Added multiple Auto-Assignment controls to the holotape to allow fine-tune control over which settlers are assigned to plots.
Activating terminals created by Sim Settlements will no longer make the settlers hostile.
Certain NPCs not meant to be assignable, such as the Minuteman Radio Operator, will no longer be auto-assigned.
Dead Settlers should no longer be assigned to plots.
NPCs should do better at dual assignment between Residential Plots and vanilla/mod added work objects.

Version 1.0.3

The Builders

Improves Crash Monitor to cause less false positives.
Improved demolitions! Thanks veteran_gamer!
Preps your game to work with external Addon packs created by the Builder's Toolkit

Version 1.0.2

Dead Plot Bug Fix

Fixes a game-breaking bug. See https://www.youtube.com/watch?v=Lk73lWDJsdY for details.

Version 1.0.2a

Adds another way to detect the Dead Plot bug in the background, will display to you the same way the other did as described here: https://www.youtube.com/watch?v=Lk73lWDJsdY&t=1s
This is an optional update, though if you think you have the bug and never received the crash prompt, it's worth downloading.

Version 1.0.1

Robots and Orphans

Removed several worldspace edits the CK decided to save.
Child settlers are no longer assignable to plots. Presently, if they are assigned to any item that doesn’t have “Child Can Use” flagged causes them to get stuck, and since Sim Settlements assigns to all sub objects created by a plot, I don’t want to risk “breaking” those child settlers.
Robots no longer require food, water, and homes in the Sim Settlement calculations.
Robots are no longer assignable to residential plots. They don’t need them! This may become an optional feature in the future.
Made changes to the message system to reduce the likelihood building upgrades are reported from the wrong settlement.
Added Personal Inspections to holotape Zoning Laws. This will allow your buildings to continue upgrading even if you haven’t had a chance to see them in their current state.
Fixed issue where buildings could upgrade the second you arrive at a settlement before you got a chance to see their current level.
Tax Rate now correctly displays on plot. The rate displayed is the caps/tax period.
Negative water rates will now show correctly as whole numbers on the HUD.