Question 3rd party plot options not appearing

[Rain]

Plot/ expansion packs made by 3rd parties (such as industrial city) no longer appear in the build plans in the plot option section. I've reinstalled the mods several times and checked for conflicting errors but no luck. Anyone got any ideas?

 

[RayBo]

Have you checked your save file with fallrim? See if your scripts are backed up.

I have had this issue before and did what you did and reinstall everything. In my case, I did not need to do that.

Now , if it is the first time or you just updated then maybe you need to try a manual install but if they were already working then try the below low tech fix.

What I do now is run off to a corner of the settlement, look away from the center and wait. Yep, just wait.

Eventually, they do load up. They may not all hit at once but once they start it is ok to move around they will continue to load.

 

[WetRats]

It definitely seems to help to wait a few minutes after loading before going into Workshop mode or the ASAM Sensor.. There's a whole lot of stuff sorting itself out in the background for a while.

 

[Rain]

Here's the kicker the 3rd party plots i made before my issues are still their and work fine, the issue is I cannot make new ones and I can only change them to base sim settlements plots.

 

[RayBo]

Here's the kicker the 3rd party plots i made before my issues are still their and work fine, the issue is I cannot make new ones and I can only change them to base sim settlements plots.

@Rain we were talking about this on the discord "your specific issue"

If you have waited.... and they still do not load.

Then my recommendation is to check your save file with fallrim?

See if your scripts are backed up.

There are several good articles in the learning center for how to do this.

 

[Rain]

I shall attempt also i can't assign leaders