1. Report to Jake and listen to his explanation of the latest tech.
2. Load holotape into the indicated terminal.
3. Read the green dialog box and click OK.
4. Go up on the roof and talk to Jake, who will tell you to meet him at the particular settlement that he sends to your Pip-Boy. (In my case, this was Sanctuary.)
5. Jake tells you to build 2x2 plots of three types (Commercial, Recreational, and Martial). In each case, you may have to connect electrical power and assign a settler to building before the building process starts. Patiently watch Jake build and do not bother trying to activate the sensor. After building concludes, you can listen to the Robco voice-recording.
6. Jake will give a special introduction regarding municipal plots, then will tell you to lay down an ASAM sensor to build a municipal plot. Connect power, assign a builder if necessary, then watch Jake build. Afterward, Jake will explain the special features that make municipal plots more complicated than other plots. The quest ends there.
2. Load holotape into the indicated terminal.
3. Read the green dialog box and click OK.
4. Go up on the roof and talk to Jake, who will tell you to meet him at the particular settlement that he sends to your Pip-Boy. (In my case, this was Sanctuary.)
5. Jake tells you to build 2x2 plots of three types (Commercial, Recreational, and Martial). In each case, you may have to connect electrical power and assign a settler to building before the building process starts. Patiently watch Jake build and do not bother trying to activate the sensor. After building concludes, you can listen to the Robco voice-recording.
6. Jake will give a special introduction regarding municipal plots, then will tell you to lay down an ASAM sensor to build a municipal plot. Connect power, assign a builder if necessary, then watch Jake build. Afterward, Jake will explain the special features that make municipal plots more complicated than other plots. The quest ends there.